Communications Pouches

CCRS-V The Comms Cable Retention Strap was designed to secure the user's MBITR cords/cables and still allow them to be removed from the vest as opposed to cable tying them on and then having to cut the cable ties to remove them. 7 inches...

EPIRB / PLB Pouch Belt Mount Designed to fit perfectly with most smaller EPIRB/PLB units. Belt Mounted - to suit up to 60mm width belts Specs: Made from 1000d or 500D Cordura, ITW mil-spec buckle closure. Size: 55mm wide x 100mm long x 40mm...

EPIRB / PLB Pouch Molle Mount  Designed to fit perfectly with most smaller EPIRB/PLB units. Available in MOLLE or Belt mount options. Specs: Made from either 500D or 1000d Cordura, ITW mil-spec buckle closure. Size: 55mm wide x 100mm long x 40mm deep -...

Introducing the new EPIRB/PLB Pro! This pouch is specifically designed to perfectly fit most smaller EPIRB/PLB units. Made with our new hybrid back to fit both Molle and belt. It can be mounted on your MollyMe, Hunters belt, Bino Harness, any molle platform or...

Foretrex  Wrist Pouch Antimicrobial spacer mesh close to the skin keeps you comfortable and wicks sweat away.  Elastic straps ensure you maintain a full range of motion and don’t cut off your circulation. Constructed with solution dyed 1000d Cordura ®, YKK zippers ®, ITW...

Imperator Arm Board A tactical “wrist coach” or “quarterback arm play holder” widely used in the NFL for referencing plays in games, can also be used to store target information or anything you need to refer to quickly. Antimicrobial spacer mesh close to the...

Long Radio/GPS Pouch (Belt Loop) Our Long radio/GPS pouch has been designed to fit a variety of makes and models, including most Garmin Rhino GPS. This pouch can offer more screen and depth protection than our standard radio pouch. Made from the same tough...

Long Radio/GPS Pouch (Molle Mount) Our Long radio/GPS pouch has been designed to fit a variety of makes and models, including most Garmin Rhino GPS. This pouch can offer more screen and depth protection than our standard short radio pouch. Specs:  Made from the...

Low Profile Admin Pouch Everything a commander needs access to quickly.  Slots for the issue notebook, reference cards and a clear sheet for target info.  Pen sleeves behind the hook fastener so you can get to them quickly.  Loop field on the front for...

PRR Pouch Built to hold the single and duplex PRR.  Seared holes on either side allow you to mount it for left or right-hand use.  Secures with a side-release buckle. Specs: Occupies: 2 columns by 2 rows. Constructed with solution dyed 1000d Cordura ®,...

PTT offsets are a simple solution to the problem of mounting a PTT to a plate carrier and either having to give up real estate or having it impede a magazine change.  Available in Black and Multicam.

Introducing the TwinNeedle 3 Point chest Radio Harness! Our Radio harness boosts a buckle and adjustable bungee retention system for easy in/out of your radio. Come with an internal zipped pouch for spare storage. We have designed this with adjustable strap system so you...

Short Radio/GPS Pouch (Belt Loop) Built to hold a radio, GPS and certain range finders and more. The open top with bungee retention is the best option for anything with long or wide antennas.  All made from either 500D Cordura or 1000D Cordura Mil...

Short Radio/GPS Pouch (MOLLE mount) Built to hold a radio, GPS and certain range finders and more. The MOLLE mount enables it to be secured to your MollyMe, Hunters belt, Bino Harness or anything standard MOLLE platform Specs: All made from either 500D Cordura...